Builder Portfolios
Browse Projects
Previous
Previous
Complete Vintage AC for Ford F100
Maintenance
BY: Grant D Ruggles
Complete vintage AC system installed in Ford F100. New compressor, pulley, complete hose system,...
Chevy G Series Van Roof Rack
MIG
BY: Grant D Ruggles
Custom built Chevy G Series Van Roof Rack. Tubing is 1 3/8" with mesh base. Mounts for 4 off ro...
Previous
Previous
Previous
Previous
Previous
European Pressure Directive (PED) Consultation
Engineering
BY: Patrick Emmert
‣ Determine the Appropriate Risk
‣ Category and Module
‣ Valves, pipes, etc.
‣ PED 2014/68...
Food Grade Tank Fittings
Fabrication
BY: Mason Maltby
Spacetron Inc. Manufactures a full line of Food grade stainless steel tank adaptors and various f...
Previous
Previous
Previous
Fuel Tank Prototype Drafting v2
Consulting
BY: Jonathan Hunt
Major revision to KTM fuel tank. CAD modeling and manufacturing drawings provided to client. Grap...
In-House Products
Welding
BY: Bill Flanagan
These are a few examples of parts we make for use in our assemblies and finished products.
We ha...
Previous
| Image | Title | Categories | Cost | Description | Service Provider | Bumps |
|
Ecodiesel Camaro | Electronics, Engine, LSx Swap, Engineering, and Fabrication | 50000 | Just finishing up a Twincharged Ecodoesel Camaro race car for the 2021 Pike's Peak | Pat O | 0 |
|
Custom Fire Pits | Architectural, Design, Fabrication, Welding, and MIG | Architectural fabrication examples of custom built fire pits. Design / Build | Grant D Ruggles | 0 | |
|
Plasma Cut Paper Towel Holder | Design, CAD, Concept Sketch, Fabrication, and Plasma Cutting | Plasma Cut Jeep Paper Towel Holder. Design and Build. | Grant D Ruggles | 0 | |
|
Architectural Planter Boxes | Fabrication, Painting, Welding, and MIG | 2300 | This is a detailed post of completed project: https://openbuildnetwork.com/jobs/549 Fabricated 3/16" steel planter boxes from customer design. Custom matte black finish w/ clear coat Delivered | Garrett | 0 |
|
Patio w/ Fabricated Planter Boxes | Design, Fabrication, Welding, and MIG | Patio w/ Fabricated Planter Boxes through openbuild network. | Rebecca | 0 | |
|
2018 KTM 690 Oil Change | Maintenance | KTM 690 First Oil Change 600 miles Oil drain plug - 20Nm (15 ft lbs) Oil screen plug - 15 Nm (11 ft lbs) Oil filter covers - 6 Nm (5 ft lbs) Engine oil SAE 10W/50 1.7L HIFLO HF 651 HIFLO HF155 | Lance Schwarzkop | 0 | |
|
Jeep Cherokee Seat Welding | Maintenance, Welding, and MIG | Jeep Cherokee seat repair. Had to weld the seat base in several places. Good as new. | Grant D Ruggles | 1 | |
|
Biltwell (HB-THN-01-BK) Tracker High Non-Dimpled | Fabrication and Maintenance | 87 | Quick and easy project. Installed 1" Biltwell high tracker bar on a 2014 Triumph Bonneville T100. Tools: 5 and 6mm hex, phillips screwdriver A couple of tips in this video: -The bars are re... | Lance Schwarzkop | 0 |
|
Custom HONDA CB 100 Racing Style | Design, Engineering, and Painting | 1200 | HONDA CB 100 '74 Racing Look | Dheny Kurniawan | 4 |
|
Scrambler | Engine and Painting | 1200 | Custom Scrambler Based Engine YAMAHA SCORPIO | Dheny Kurniawan | 4 |
|
Motorcycle Transmission Repair | Engine and Maintenance | Suzuki 250 dirt bike transmission repair. Gear replacement. | Coastriders Powersports | 0 | |
|
2014 Triumph Bonneville | Fabrication and Maintenance | 2014 Triumph Bonneville -Cafe bars -British Customs seat -British Customs exhaust -Tail light conversion -short front fender -dual sport tires | Lance Schwarzkop | 0 | |
|
R1100rt | Electronics, Engine, and Maintenance | 450 | Electrical and mechanical works.. | Ali Duygu | 1 |
|
Triumph Bonneville Headlight Bulb Replacement | Maintenance | 24 | Replace the headlight bulb on your Triumph Bonneville (2014) - Remove the screw on the right with a Phillips screwdriver - Remove the one the left with a 1/8 hex - Unplug the connector - Remo... | Lance Schwarzkop | 0 |
|
cdi Install Honda xl600r | Maintenance | 150 | CDI install Honda xl600r Was having a hard time getting the bike started when it was warm. Coastriders diagnosed the problem as a bad cdi. Starts first kick now hot or cold. cdi is loca... | Lance Schwarzkop | 0 |
|
Spindle Nut Install Rotor | Maintenance | Spindle nut install - install washer in the slot - thread spindle nut over the washer -12 ft lbs of torque to seat the bearings - 3 Thousandths play *Don't over tighten this nut. Check the sp... | Lance Schwarzkop | 0 | |
|
Bearing Grease G30 Van | Maintenance | Bearing grease Bearing behind the rotor Bearing in front of rotor 1984 Chevy G30 Van 1 ton Brake maintenance | Lance Schwarzkop | 0 | |
|
Brake pad install Chevy Van | Maintenance | Brake pad install Thread in caliper bolts from the backside of caliper 1984 Chevy Van G30 Brake Maintenance | Lance Schwarzkop | 0 | |
|
Plasma guitar | Design, CAD, Concept Sketch, Mill / CNC, CNC, Prototype, and Woodworking | 1 | Custom designed and manufactured cnc plasma cut telecaster guitar. | Justin | 1 |
|
All metal hostess table | Fabrication, CNC, Welding, MIG, and Woodworking | All metal frame wrapped in one piece 16 gauge steel with walnut counter and copper logo | Garrett | 2 | |
|
Honda Goldwing, '84 Standard | Electronics, Engine, Fabrication, and Maintenance | 0 | Customizing a GL1200 for travel and daily riding to include the dogs, duck, and any other "what's the worse that could happen" ideas. | Kevin Tschida | 0 |
|
New Calipers G30 Chevy | Maintenance | New Calipers Chevy G30. | Lance Schwarzkop | 0 | |
|
Soup Cup Prototype Lids | 3D Printing, Design, CAD, Concept Sketch, and Engineering | 3800 | 3D Printed prototype lids needed to setup tooling in a food processing facility. These lids were a difficult build and the customer came to me after another firm attempted to print them first.... | George Simonoff | 1 |
|
Camp Shower for Roof Rack | Fabrication | 100 | Camp Shower for Roof Rack - 12 ft of 4" ABS - Reducer 4" to 3" with clean out - 45 angle - Reducer 4" to 2" - Convert 2" to 3/4 MPT female - Garden house spot 3/4 MPT male - 2 Large hose cl... | Lance Schwarzkop | 0 |
|
2007 zx6r engine rebuild | Engine and Maintenance | This 2007 zx6r came to me to me not running and with what seemed to be a seized engine. The owner said that he was riding along on the freeway when the engine lost power and suddenly shut off. Afte... | Luke Arana | 1 | |
|
2005 r1 Head Gasket Replacement | Engine and Maintenance | The owner of this 2005 R1 came to me saying that his bike was overheating badly. After fixing a large coolant leak and replacing a faulty thermostat, the problem still persisted. Once I preformed a... | Luke Arana | 1 | |
|
Visor | Fiberglass and Painting | Fiberglass visor. This was a junkyard find from an old boogie van. | Lance Schwarzkop | 1 | |
|
Ranger Jump Seats | Fabrication and Maintenance | These jump seats are from a Ford Ranger. They're great for short trips when you need space for a couple of more people. They're compact and fold up out of the way. | Lance Schwarzkop | 0 | |
|
74 Corvette Stringray | Auto Body, Fiberglass, and Painting | 75 | A beautiful 74 Corvette Stingray was involved in a collision. It had damage in the front of the vehicle. The whole front end was fiberglass. We restored it back to life. | Alex Jaime | 2 |
|
Cup Holders | Mill / CNC | Used the CNC router to cut holes for my stainless steel cup holders. The table was made of plywood with a textured laminate top. Good project for testing out the CNC. | Lance Schwarzkop | 0 | |
|
56 f100 | Auto Body, Engine, LSx Swap, Fabrication, and TIG | Custom build | Brandon | 1 | |
|
Custom Upholstery | Upholstery | Custom upholstery for auto and marine. | Mitch Watts and Sons | 1 | |
|
Triumph Motorcycle Gauge Mods | 3D Printing, Design, CAD, and Concept Sketch | 250 | Designed and printed custom Truimph gauge needles and a new indicator cover per customer requirements. indicator cover printed out of carbon fiber nylon and gauge needles out of ABS plastic. | George Simonoff | 1 |
|
Bed liner 1996 Suzuki RF 900 R | Auto Body and Painting | 150 | Stock, this bike had a terrible color scheme. Not wanting to spend a few grand on an old beater, a friend suggested Raptor bed liner which I'd seen some cool applications as auto body paint in the ... | Frank Dolce | 2 |
|
Arcade Coffee Table | CAD, Concept Sketch, Electronics, Fabrication, Painting, Prototype, and MIG | 0 | It is constructed with an old table. That was cut out to accommodate a large display. A metal frame was welded to attach the display to the table. The controllers are just off the shelf arcade butt... | Jimmy Molina | 3 |
|
Like Light | 3D Printing, Concept Sketch, Electronics, Fabrication, and Prototype | 0 | An IoT device that connects to Facebook, enabling the device to periodically check a linked page's Like count. When the count increases, the Like Light subsequently lights up. You can use this uniq... | Jimmy Molina | 2 |
|
Custom Jet Boat with V6 Two Stroke | Engine, Fabrication, Welding, and TIG | Total custom aluminum jet boat fabrication. Custom pump shoes and custom intake grates for Kawasaki Pump system. Variety of engine configurations are available. Pictured is a 240 Sport Jet V6 Tw... | Justin Barth | 7 | |
|
2 Stroke Bicycle Kit | Engine | 130 | 2 Stroke Bicycle Engine Kit. Cheap and fun hobby project. https://www.amazon.com/Mega-Motors-Silver-Bicycle-Engine/dp/B00LMGG6PY/ref=sr_1_19?ie=UTF8&qid=1520827474&sr=8-19&keywords=2+stroke+bic... | Dave Pietz | 1 |
|
Beverage Industry Pilot Equipment | Engineering, Fabrication, Maintenance, and Prototype | Experience with food and beverage industry pilot equipment. Pasteurization (tube in tube, direct steam), HPP, homogenization, juicing, carbonation, aseptic filling. MicroThermics, Armfiled, OMVE,... | Lance | 4 | |
|
Vehicle Smog and Complete Service | Engine and Maintenance | Vehicle service and smog for all makes and models. Brakes, oil changes, smog, and general maintenance. ASE Certified mechanics. | Joel Wrona | 2 | |
|
Van Interior floor Raptor Liner | Auto Body, Maintenance, and Painting | 300 | Raptor lined the interior floor of my van. 1. Removed all the seats - 1 hour 2. Sanded floor with 80 grit sandpaper to remove the rust. - 12 hours 3. Tape off the van with painters plasti... | Lance Schwarzkop | 2 |
|
ISX CUMMINS CYLINDER HEAD SURFACE | Engine and Maintenance | ISX CUMMINS OVERSIZED CYLINDER HEAD SURFACE | ADVANCED ENGINE & MACHINE | 4 | |
|
Custom Build | Design, Engineering, and Fabrication | Custom fabrication build | Delaney Manufacturing Inc | 2 | |
|
Fiber Laser Cutting | Fabrication | Automated Fiber Laser | Delaney Manufacturing Inc | 3 | |
|
Bungee Buckle Prototype | 3D Printing, Design, CAD, Concept Sketch, Engineering, and Prototype | 75 | This was a concept brought to us to develop a bungee buckle that would allow any length of EPDM rubber (bungee cord material) to be made for a variable length strap. The prototypes were design... | George Simonoff | 5 |
|
Equipment Capabilities | Fabrication, Welding, and MIG | 3500 watt CO2 laser 80 ton press break MIG welders Bandsaws | Mason Maltby | 3 | |
|
Copper Plating | Plating and Copper | Copper plated shaker for a customer. | AC Plating | 0 | |
|
Nickel Plating | Plating and Nickel | Decorative nickel plated faucet. Electroless nickel plated hinge. We have many finishes available. | AC Plating | 0 |